Configuring an MA to Monitor an Interface

This section provides a sample of configuring an MA to monitor an interface using the edit-config method.

**Table 1** Configuring an MA to monitor an interface
Operation	XPATH
edit-config	/huawei-cfm/cfm/md/md-name /huawei-cfm/cfm/md/ma/ma-name /huawei-cfm/cfm/md/ma/ais/link-status-interface

Data Requirements

Item	Data	Description
MD name	md_test	Set the MD name to md_test.
MA name	ma_test	Set the MA name to ma_test.
Interface name	GigabitEthernet0/0/1	Configure an MA to monitor GigabitEthernet0/0/1.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="6" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <huawei-cfm:cfm xmlns:huawei-cfm="urn:huawei:params:xml:ns:yang:huawei-cfm">
        <huawei-cfm:md>
          <huawei-cfm:md-name>md_test</huawei-cfm:md-name>
          <huawei-cfm:ma>
            <huawei-cfm:ma-name>ma_test</huawei-cfm:ma-name>
            <huawei-cfm:ais>
              <huawei-cfm:link-status-interface>GigabitEthernet0/0/1</huawei-cfm:link-status-interface>
            </huawei-cfm:ais>
          </huawei-cfm:ma>
        </huawei-cfm:md>
      </huawei-cfm:cfm>
    </config>
  </edit-config>
</rpc>

Response example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>