Configuring Non-Standard PD Compatibility for PoE Ports

This section provides a sample of configuring non-standard PD compatibility for PoE ports using the edit-config method.

**Table 1** Configuring non-standard PD compatibility for PoE ports
Operation	XPATH
edit-config	/ietf-interfaces:interfaces/interface/huawei-poe:poe/poweron-legacy-level

Data Requirements

**Table 2** Configuring non-standard PD compatibility for PoE ports
Item	Data	Description
PoE port	GigabitEthernet0/0/1	Configure forcible power supply for the PoE port. Ensure that this interface exists and has been configured on the device. For details about the configuration, see Configuring Basic Attributes of an Interface.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
 <edit-config>
  <target>
   <running/>
  </target>
  <config>
   <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
    <if:interface>
     <if:name>GigabitEthernet0/0/1</if:name>
      <if:type xmlns:iana-if-type="urn:ietf:params:xml:ns:yang:iana-if-type">iana-if-type:ethernetCsmacd</if:type>
     <huawei-poe:poe xmlns:huawei-poe="urn:huawei:params:xml:ns:yang:huawei-poe">
      <huawei-poe:poweron-legacy-level>force</huawei-poe:poweron-legacy-level>
     </huawei-poe:poe>
    </if:interface>
   </if:interfaces>
  </config>
 </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
message-id="1">
 <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
message-id="1">
 <rpc-error>
  <error-app-tag>-1</error-app-tag>
  <error-message>Service
process failed.</error-message>
  <error-info>Error on node /ietf-interfaces:interfaces/interface[name="GigabitEthernet0/0/1"]/huawei-poe:poe/poweron-legacy-level</error-info>
 </rpc-error>
</rpc-reply>