Setting the Period for Detecting EFM Errored Codes

This section provides a sample of setting the period for detecting EFM errored codes on an interface using the edit-config method.

**Table 1** Setting the period for detecting EFM errored codes
Operation	XPATH
edit-config	/ietf-interfaces/interfaces/interface/name /ietf-interfaces/interfaces/interface/huawei-efm:efm/error-code/period

Data Requirements

Item	Data	Description
Interface name	GigabitEthernet0/0/1	Specify the interface where the period for detecting EFM errored codes needs to be configured.
Period for detecting EFM errored codes	10	Set the period for detecting EFM errored codes to 10s.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="25" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>GigabitEthernet0/0/1</if:name>
          <huawei-efm:efm xmlns:huawei-efm="urn:huawei:params:xml:ns:yang:huawei-efm">
            <huawei-efm:error-code>
              <huawei-efm:period>10</huawei-efm:period>
            </huawei-efm:error-code>
          </huawei-efm:efm>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="25">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="25">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>