Setting the Threshold for Detecting EFM Errored Frame Seconds

This section provides a sample of setting the threshold for detecting EFM errored frame seconds on an interface using the edit-config method.

**Table 1** Setting the threshold for detecting EFM errored frame seconds
Operation	XPATH
edit-config	/ietf-interfaces/interfaces/interface/name /ietf-interfaces/interfaces/interface/huawei-efm:efm/error-frame-second/threshold

Data Requirements

Item	Data	Description
Interface name	GigabitEthernet0/0/1	Specify the interface where the threshold for detecting EFM errored frame seconds needs to be configured.
Threshold for detecting EFM errored frame seconds	10	Set the threshold for detecting EFM errored frame seconds to 10.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="22" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>GigabitEthernet0/0/1</if:name>
          <huawei-efm:efm xmlns:huawei-efm="urn:huawei:params:xml:ns:yang:huawei-efm">
            <huawei-efm:error-frame-second>
              <huawei-efm:threshold>10</huawei-efm:threshold>
            </huawei-efm:error-frame-second>
          </huawei-efm:efm>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="22">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="22">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>