Configuring EFM Remote Loopback

This section provides a sample of configuring EFM remote loopback using the rpc method.

**Table 1** Configuring EFM remote loopback
Operation	XPATH
rpc	/huawei-efm/remote-loopback/operate-type /huawei-efm/remote-loopback/timeout /huawei-efm/remote-loopback/interface

Data Requirements

Item	Data	Description
EFM remote loopback	start	Initiate EFM remote loopback.
Timeout interval for EFM remote loopback	0	Set the timeout interval for EFM remote loopback to 0.
Interface name	GigabitEthernet0/0/1	Specify the interface that needs to be configured with EFM remote loopback.

Request Example

<?xml version="1.0" encoding="UTF-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="53">
  <huawei-efm:remote-loopback xmlns:huawei-efm="urn:huawei:params:xml:ns:yang:huawei-efm">
    <huawei-efm:operate-type>start</huawei-efm:operate-type>
    <huawei-efm:timeout>0</huawei-efm:timeout>
    <huawei-efm:interface>GigabitEthernet0/0/1</huawei-efm:interface>
  </huawei-efm:remote-loopback>
</rpc>

Response example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="53">
  <ok/>
</rpc-reply>

Sample of failed response

</rpc-reply>
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="53">
  <rpc-error>
    <error-message>valid user-defined rpc fail.</error-message>
  </rpc-error>
</rpc-reply>