Associating a Physical Link Fault Event with an Interface

This section provides a sample of associating a physical link fault event with an interface using the edit-config method.

**Table 1** Associating a physical link fault event with an interface
Operation	XPATH
edit-config	/ietf-interfaces/interfaces/interface/name /ietf-interfaces/interfaces/interface/huawei-efm:efm/link-fault-trigger

Data Requirements

Item	Data	Description
Interface name	GigabitEthernet0/0/1	Specify the interface to be associated with a physical link fault event.
Whether the interface is associated with a physical link fault event	true	Associate a physical link fault event with an interface.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="9" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>GigabitEthernet0/0/1</if:name>
          <huawei-efm:efm xmlns:huawei-efm="urn:huawei:params:xml:ns:yang:huawei-efm">
            <huawei-efm:link-fault-trigger>true</huawei-efm:link-fault-trigger>
          </huawei-efm:efm>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="9">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="9">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>