Querying Interface Status Information

This section provides a sample of querying interface status information using the get method.

**Table 1** Querying interface status information
Operation	XPATH
get	/ietf-interfaces:interfaces-state/interface/name /ietf-interfaces:interfaces-state/interface/type /ietf-interfaces:interfaces-state/interface/admin-status /ietf-interfaces:interfaces-state/interface/oper-status /ietf-interfaces:interfaces-state/interface/last-change /ietf-interfaces:interfaces-state/interface/if-index /ietf-interfaces:interfaces-state/interface/phys-address /ietf-interfaces:interfaces-state/interface/speed /ietf-interfaces:interfaces-state/interface/statistics /ietf-interfaces:interfaces-state/interface/ huawei-interfaces:common/description /ietf-interfaces:interfaces-state/interface/ hw-ethernet:physical-state/speed /ietf-interfaces:interfaces-state/interface/ hw-ethernet:physical-state/duplex

Request example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="6" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <get>
    <filter type="subtree">
      <if:interfaces-state xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>XGigabitEthernet0/0/3</if:name>
        </if:interface>
      </if:interfaces-state>
    </filter>
  </get>
</rpc>

Response example

##### Ok Reply or Operation Successful #####
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <data>
    <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
      <interface>
        <name>XGigabitEthernet0/0/3</name>
        <type xmlns:iana-if-type="urn:ietf:params:xml:ns:yang:iana-if-type">iana-if-type:ethernetCsmacd</type>
        <oper-status>down</oper-status>
        <if-index>201</if-index>
        <phys-address>00:0b:09:47:5c:23<//phys-address>
        <speed>10000000000</speed>
        <statistics>
          <in-octets>0</in-octets>
          <in-unicast-pkts>0</in-unicast-pkts>
          <in-broadcast-pkts>0</in-broadcast-pkts>
          <in-multicast-pkts>0</in-multicast-pkts>
          <in-discards>0</in-discards>
          <in-errors>0</in-errors>
          <out-octets>0</out-octets>
          <out-unicast-pkts>0</out-unicast-pkts>
          <out-broadcast-pkts>0</out-broadcast-pkts>
          <out-multicast-pkts>0</out-multicast-pkts>
          <out-discards>0</out-discards>
          <out-errors>0</out-errors>
          <description xmlns="urn:huawei:params:xml:ns:yang:huawei-interface">
            <in-bandwidth>0</in-bandwidth>
            <out-bandwidth>0</out-bandwidth>
          </ethernet-statistics>
        </statistics>
        <description xmlns="urn:huawei:params:xml:ns:yang:huawei-interface">toN10</description>
        <common xmlns="urn:huawei:params:xml:ns:yang:huawei-interfaces">
           <description>toN10</description>
        </common>
        <ethernet xmlns="urn:huawei:params:xml:ns:yang:huawei-interface">
          <speed>10Gbps</speed>
          <duplex>full</duplex>
        </ethernet>
     <physical-state xmlns="urn:huawei:params:xml:ns:yang:huawei-ethernet">
       <speed>10Gbps</speed>
       <duplex>full</duplex>
      </physical-state>
     </interface>
    </interfaces-state>
  </data>
</rpc-reply>