Configuring the Destination Port Number for the Switch to Send Packets to the Portal Server

This section provides a sample of configuring the destination port number for the switch to send packets to the Portal server using the merge method. You can also use the create method to configure the destination port number for the switch to send packets to the Portal server using the merge method.

**Table 1** Configuring the destination port number for the switch to send packets to the Portal server
Operation	XPATH
edit-config:merge	/huawei-aaa-portal/portal/portal-server/destination-port/port

Data Requirement

**Table 2** Configuring the destination port number for the switch to send packets to the Portal server
Item	Data	Description
port	555	Set the destination port number for the switch to send packets to the Portal server to 555.

Request Example

<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="123">
 <edit-config>
  <target>
   <running/>
  </target>
  <error-option>rollback-on-error</error-option>
  <config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
   <portal xmlns="urn:huawei:params:xml:ns:yang:huawei-aaa-portal">
    <portal-server> 
     <name>huawei</name>
     <destination-port>
      <port>555</port>
      <always>true</always>
     </destination-port>
    </portal-server>  
   </portal>
  </config>
 </edit-config>
</rpc>

Response Example

Sample of successful response

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="DEVICECONFIG_012824316d704d43adb16b1a4245d273">
 <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="17">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>