Configuring the Number of the Port Through Which the Switch Listens to Portal Packets

This section provides a sample of configuring the number of the port through which the switch listens to Portal packets using the merge method. You can also use the create method to configure the number of the port through which the switch listens to Portal packets.

**Table 1** Configuring the number of the port through which the switch listens to Portal packets
Operation	XPATH
edit-config:merge	/huawei-aaa-portal/portal/listening-port

Data Requirement

**Table 2** Configuring the number of the port through which the switch listens to Portal packets
Item	Data	Description
listening-port	3210	Set the number of the port through which the switch listens to Portal packets to 3210.

Request Example

<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="DEVICECONFIG_012824316d704d43adb16b1a4245d273"> 
 <edit-config>
  <target>
   <running/>
  </target>
  <error-option>rollback-on-error</error-option>
  <config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
   <portal xmlns="urn:huawei:params:xml:ns:yang:huawei-aaa-portal">
    <listening-port>3210</listening-port>
   </portal>
  </config>
 </edit-config>
</rpc>

Response Example

Sample of successful response

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="DEVICECONFIG_012824316d704d43adb16b1a4245d273">
 <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="37">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>