Enabling Handshake with Online 802.1X Authentication Users

This section provides a sample of enabling handshake with online 802.1X authentication users using the merge method. You can also use the create method to enable handshake with online 802.1X authentication users.

**Table 1** Enabling handshake with online 802.1X authentication users
Operation	XPATH
edit-config:merge	/huawei-nac-dot1x:dot1x-access/configure-mode/unified-mode/dot1x-access-profile/handshake

Data Requirement

**Table 2** Enabling handshake with online 802.1X authentication users
Item	Data	Description
name	test	Enable handshake with online 802.1X authentication users. The 802.1X access profile must exist on the switch.
handshake	true

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="43a8e485-35d2-499e-895c-e2d2d5f555a8">
 <edit-config>
  <target>
   <running/>
  </target>
  <error-option>rollback-on-error</error-option>
  <config>
   <dot1x-access xmlns="urn:huawei:params:xml:ns:yang:huawei-nac-dot1x">
    <dot1x-access-profile>
     <name>test</name>
     <handshake>true</handshake>
    </dot1x-access-profile>
   </dot1x-access>
  </config>
 </edit-config>
</rpc>

Response Example

Sample of successful response

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="43a8e485-35d2-499e-895c-e2d2d5f555a8">
 <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="43a8e485-35d2-499e-895c-e2d2d5f555a8">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>