Configuring the Device to Dynamically Adjust the Rate of Packets From NAC Users

This section provides a sample of configuring the device to dynamically adjust the rate of packets from NAC users using the merge method.

**Table 1** Configuring the device to dynamically adjust the rate of packets from NAC users
Operation	XPATH
edit-config:merge	/huawei-nac:nac-access/configure-mode/unified-mode/speed-limit-auto

Data Requirements

**Table 2** Configuring the device to dynamically adjust the rate of packets from NAC users
Item	Data	Description
speed-limit-auto	true	Configure the device to dynamically adjust the rate of packets from NAC users.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="0" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <hw-nac:nac-access xmlns:hw-nac="urn:huawei:params:xml:ns:yang:huawei-nac">
        <hw-nac:speed-limit-auto>true</hw-nac:speed-limit-auto>
      </hw-nac:nac-access>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="0">
 <ok/>
</rpc-reply>

Sample of failed response

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="20">
 <rpc-error>
  <error-type>application</error-type>
  <error-tag>operation-failed</error-tag>
  <error-severity>error</error-severity>
  <error-message>parse configuration error.</error-message>
 </rpc-error>
</rpc-reply>