Configuring a Dot1q Termination Sub-interface

This section provides a sample of configuring a Dot1q termination sub-interface using the Config method.

**Table 1** Configuring Dot1q termination sub-interface
Operation	XPATH
Config	/ietf-interfaces:interfaces/interface/huawei-vlan-termination:vlan-termination-list/termination-type /ietf-interfaces:interfaces/interface/huawei-vlan-termination:vlan-termination-list/dot1q-termination-list

Data Requirements

**Table 2** Configuring Dot1q termination sub-interface
Item	Data	Description
Sub-interface name	XGigabitEthernet0/0/1.2	-
Type of a termination sub-interface	dot1q	Set the type of a sub-interface to Dot1q termination.
Terminated VLAN tag of a sub-interface	3333..3334	Set the terminated VLAN tag of a sub-interface. 3333: Set the smallest VLAN tag in user packets to 3333. 3334: Set the largest VLAN tag in user packets to 3334.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="0" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>XGigabitEthernet0/0/1.2</if:name>
          <if:type xmlns:iana-if-type="urn:ietf:params:xml:ns:yang:iana-if-type">iana-if-type:propVirtual</if:type>
          <hw-vlan-termination:vlan-termination-list xmlns:hw-vlan-termination="urn:huawei:params:xml:ns:yang:huawei-vlan-termination">
            <hw-vlan-termination:termination-type>dot1q</hw-vlan-termination:termination-type>
            <hw-vlan-termination:dot1q-termination-list>
              <hw-vlan-termination:dot1q-termination>3333..3334</hw-vlan-termination:dot1q-termination>
            </hw-vlan-termination:dot1q-termination-list>
          </hw-vlan-termination:vlan-termination-list>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Deletion Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>XGigabitEthernet0/0/1.2</if:name>
          <if:type xmlns:iana-if-type="urn:ietf:params:xml:ns:yang:iana-if-type">iana-if-type:propVirtual</if:type>
          <hw-vlan-termination:vlan-termination-list xmlns:hw-vlan-termination="urn:huawei:params:xml:ns:yang:huawei-vlan-termination">
            <hw-vlan-termination:termination-type>dot1q</hw-vlan-termination:termination-type>
            <hw-vlan-termination:dot1q-termination-list xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0" xc:operation="delete">
              <hw-vlan-termination:dot1q-termination>3333..3334</hw-vlan-termination:dot1q-termination>
            </hw-vlan-termination:dot1q-termination-list>
          </hw-vlan-termination:vlan-termination-list>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

##### Ok Reply or Operation Successful #####
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Sample of failed response

##### Error Reply or Operation Failed #####
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <rpc-error>
    <error-app-tag>-1</error-app-tag>
    <error-message>Dot1q termination vlan range exceeds 128.</error-message>
    <error-info>Error on node /ietf-interfaces:interfaces/interface[name="XGigabitEthernet1/0/1.2"]/huawei-vlan-termination:vlan-termination-list/dot1q-termination-list</error-info>
  </rpc-error>
</rpc-reply>