Clearing ARP Security Statistics
Context
ARP security statistics cannot be restored after being cleared. Confirm the action before you use the command.
To clear ARP security statistics, run the following commands in the user view:
Procedure
- Run the reset arp packet statistics command to clear ARP packet statistics.
- Run the reset arp anti-attack statistics check user-bind interface interface-type interface-number command to clear statistics on ARP packets discarded for not matching binding entries.
- Run the reset arp anti-attack statistics rate-limit command to clear statistics on ARP packets discarded when the number of ARP packets exceeds the limit.
- Run the reset arp optimized-reply statistics [ slot slot-id ] command to clear statistics on optimized ARP Reply packets.
- Run the reset arp snooping { all | interface interface-type interface-number | vlan vlan-id | ip-address ip-address | mac-address mac-address } command to clear ARP snooping entries.