Clearing Attack Source Information
Context
Before collecting updated statistics on attack sources, run the following command in the system view to clear the existing statistics.
The cleared attack source information cannot be restored. Exercise caution when you use the command.
Procedure
- Run the system-view command to enter the system view.
- Run the reset auto-defend attack-source [ history ] [ slot slot-id ] command to clear information about the attack sources.
- Run the reset auto-defend attack-source trace-type { source-mac [ mac-address ] | source-ip [ ipv4-address | ipv6 ipv6-address ] | source-portvlan [ interface interface-type interface-number vlan-id vlan-id [ cvlan-id cvlan-id ] ] } [ slot slot-id ] command to clear statistics on attack source tracing based on source MAC addresses, source IP addresses, or source ports + VLANs.