Table 1 lists the default settings for ARP.
Parameter |
Default Setting |
|---|---|
Aging time of dynamic ARP entries |
1200s |
Maximum number of ARP aging probes |
3 |
Mode in which an interface sends ARP aging probe packets |
An interface only broadcasts the last ARP aging probe packet, and unicasts other ARP aging probe packets. |
Routed proxy ARP |
Disabled |
Intra-VLAN proxy ARP |
Disabled |
Inter-VLAN proxy ARP |
Disabled |
MAC address entry mapping multiple outbound interfaces |
No MAC address entry mapping multiple outbound interfaces is configured. |
Static ARP entry |
No static ARP entry is configured. |
Globally learning ARP entries with multicast MAC addresses |
Disabled |
Egress ARP Inspection |
Disabled |
ARP Miss messages sending |
Disabled |
ARP packets broadcasting on a VLANIF interface |
Enabled |
Sending ARP Vlink direct routes to the RM module |
Disabled |
IP address conflict detection |
Disabled |
Periodically Updating ARP Entries |
Enabled |