Creating an RMEP

Context

For other devices in the same MA, their MEPs are RMEPs for the local device. By configuring an RMEP, you can perform connectivity fault detection between the local MEP and the RMEP in one MA. If you need to detect the connectivity between a device and an RMEP, you need to create the RMEP first.

Procedure

Run system-view
The system view is displayed.
Run cfm md md-name
The MD view is displayed.
Run ma ma-name
The MA view is displayed.
Run remote-mep mep-id mep-id [ mac mac-address ]
An RMEP in the current MA is created.

Follow-up Procedure

If you need to create multiple RMEPs in an MA, repeat Step 4.
If you need to create multiple RMEPs in multiple MAs, repeat Step 3 and Step 4.
If you need to create multiple RMEPs in multiple MDs, repeat Step 2 to Step 4.