Terminating the Registration with iMaster NCE-Campus

Context

After logging in to a switch through SSH, you can terminate the registration of the switch with iMaster NCE-Campus to prevent the SSH session disconnection caused by IP address re-assignment from a DHCP server to the switch.

Procedure

Run the netconf register abort command to terminate the registration with iMaster NCE-Campus.
By default, a switch registers with iMaster NCE-Campus normally.
- The netconf register abort command cannot be executed repeatedly.
- Do not run this command when the switch has registered with iMaster NCE-Campus successfully.
- The command configuration is not recorded to the configuration file and the command will become ineffective after the switch restarts.