Verifying the Configuration of Deploying Zero Touch Devices Using the Commander

Procedure

Run the display ip pool { interface interface-pool-name | name ip-pool-name } used command to check the IP addresses that the DHCP server have assigned to clients.
Run the display easy-operation configuration command to check the configuration on the Commander.
Run the display easy-operation client [ client-id | mac-address mac-address | esn esn | verbose ] command to check the client on the Commander.
Run the display easy-operation group [ build-in [ device-type ] | custom [ groupname ] ] command to check group configuration on the Commander.
Run the display easy-operation download-status [ client client-id | verbose ] command to check file download status on a client.
(With network topology collection enabled) Run the display ndp command to check the NDP configuration.
(With network topology collection enabled) Run the display ndp interface { interface-type interface-number1 [ to interface-type interface-number2 ] }&<1-10> command to check neighbor information discovered through NDP on a specified interface.
(With network topology collection enabled) Run the display ntdp command to check the global NTDP configuration.
(With network topology collection enabled) Run the display ntdp device-list [ verbose ] command to check device information collected using NTDP.
(With network topology collection enabled) Run the display easy-operation topology command to check network topology information collected by the Commander.