ERPS works for ERPS rings. An ERPS ring consists of interconnected Layer 2 switching devices configured with the same control VLAN and data VLAN. Before configuring other ERPS functions, you must configure an ERPS ring.
The system view is displayed.
An ERPS ring is created and the ERPS ring view is displayed.
The function of encapsulating an ERPS ring ID in the destination MAC addresses of ERPS protocol packets is enabled.
By default, ERPS ring ID encapsulation in the destination MAC addresses of ERPS protocol packets is disabled.
The description of the device is configured. The description can contain the ERPS ring ID, which facilitates device maintenance in an ERPS ring.
By default, the description of an ERPS ring is the ERPS ring name, for example, Ring 1.