After a single ERPS ring or intersecting ERPS ring is configured, a specified port can be blocked to remove loops. Table 1 describes the ERPS configuration tasks.
Scenario |
Description |
Task |
|---|---|---|
Configure ERPS single-ring networking |
You can configure ERPS single-ring networking when there is only one ring in the network topology. |
|
Configure ERPS intersecting-ring networking |
You can configure ERPS intersecting-ring networking when there are two or more rings in the network topology and many common nodes between two rings. |
|
Configure association between ERPS and CFM |
ERPS cannot automatically detect link faults. When there are transmission devices in an ERPS ring, ERPS cannot detect whether faults on transmission devices cause slow convergence and traffic interruption. Association between ERPS and CFM solves this problem. |
(Optional) Configuring Association Between ERPS and Ethernet CFM |