Deleting the Link Aggregation Configuration

Deleting a Specified Member Interface from an Eth-Trunk

You can use either of the following methods to delete a specified member interface from an Eth-Trunk:

• Run the undo trunkport interface-type { interface-number1 [ to interface-number2 ] } &<1-8> command in the Eth-Trunk view to delete a specified member interface from an Eth-Trunk.

  <HUAWEI> system-view
  [HUAWEI] interface eth-trunk 1
  [HUAWEI-Eth-Trunk1] undo trunkport gigabitethernet 0/0/1

• Run the undo eth-trunk command in the Eth-Trunk member interface view to delete a specified member interface from an Eth-Trunk.

  <HUAWEI> system-view
  [HUAWEI] interface gigabitethernet 0/0/1
  [HUAWEI-GigabitEthernet0/0/1] undo eth-trunk

Deleting an Eth-Trunk

Delete all member interfaces from an Eth-Trunk, and then run the undo interface eth-trunk trunk-id command in the system view.

<HUAWEI> system-view
[HUAWEI] undo interface eth-trunk 10