Configuring an HACA Server Template

Procedure

1. Run system-view

   The system view is displayed.

2. Run haca-server template template-name

   An HACA server template is created and its view is displayed.

   By default, no HACA server template is created.

3. Run haca-server server-address ip-address [ port ] pki-realm-name

   The IP address and port number of the HACA server are configured.

   By default, the IP address and port number of the HACA server are not configured on the device.

4. Run the following commands as required:
   • To add the domain name to the user name in the packets sent to the HACA server, run the haca-server user-name domain-included command.
   • To retain the original user name in the packets sent to the HACA server, run the haca-server user-name original command.

   By default, the device does not modify the user name entered by the user in the packets sent to the HACA server.

5. Run haca-server source-ip ip-address

   The source IP address is specified for HACA packets.

   By default, no source IP address is specified for HACA packets. The device uses the IP address of the actual outbound interface as the source IP address of HACA packets.

6. (Optional) Run haca-server timer response-timeout interval

   The response timeout interval for the HACA server is set.

   By default, the response timeout interval for the HACA server is 5 minutes.

7. (Optional) Run haca-server timer down-delay interval

   The delay after which an HACA server is disconnected is set.

   By default, the delay after which an HACA server is disconnected is 30 seconds.

8. (Optional) Run haca-server timer reconnection interval

   The interval for reconnecting to the HACA server is set.

   By default, the interval for reconnecting to the HACA server is 1 minute.

9. (Optional) Run haca-server timer heart-beat interval

   The interval for sending heartbeat packets is set.

   By default, the interval for sending heartbeat packets is 5 minutes.

10. (Optional) Run haca-server timer register-sync interval

    The interval at which a device sends HACA registration synchronization packets to iMaster NCE-Campus is set.

    By default, a device sends HACA registration synchronization packets to iMaster NCE-Campus at an interval of 15 minutes.

11. (Optional) Run haca-server accounting-stop-packet resend [ resend-times ]

    Retransmission of accounting-stop packets is enabled, and the number of accounting-stop packets that can be retransmitted is set.

    By default, retransmission of accounting-stop packets is enabled, and three accounting-stop packets can be retransmitted.

12. Run haca enable

    HACA is enabled.

    By default, HACA is disabled.

13. Run quit

    Return to the system view.

14. (Optional) Run haca-server timer user-syn interval

    The interval for synchronizing user information to the HACA server is set.

    By default, the interval for synchronizing user information to the HACA server is 10 minutes.