< Home

Configuring the DC Output Function

Context

If PDs require DC power supply, enable DC output on the switch.

Only the S5720I-10X-PWH-SI-AC supports this function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set device dc-output [ 12V [ line1 | line2 ] | 24V ] enable

    The DC output function is enabled.

    By default, the DC output function is enabled on a switch.

Verifying the Configuration

Run the display device dc-output status command to display DC output status of the switch.

Parent Topic: Hardware Management
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >