Setting the Aging Time of Group Member Ports

The switch sets the aging time of a member port depending on IGMP messages received on the port:

When the member port receives a Report message from a downstream host, the switch sets the aging time to: Robustness variable x General Query interval + Maximum response time for General Query messages.
When the member port receives a Leave message from a downstream host, the switch sets the aging time to: Last member query interval x Robustness variable.

Run system-view
The system view is displayed.
Run vsi vsi-name
The VSI view is displayed.
Run igmp-snooping query-interval query-interval
The IGMP snooping general query interval is set.

By default, the IGMP snooping general query interval is 125 seconds.
Run igmp-snooping robust-count robust-count
The IGMP snooping robustness variable is set.

By default, the IGMP snooping robustness variable is 2.
Run igmp-snooping max-response-time max-response-time
The IGMP snooping maximum response time is set.

By default, the IGMP snooping maximum response time is 10 seconds.
Run igmp-snooping lastmember-queryinterval lastmember-queryinterval
The IGMP snooping last member query interval is set.

By default, the IGMP snooping last member query interval is 1 second.