Configuring the Device to Output Logs to the Log Buffer

Procedure

1. Run system-view

   The system view is displayed.

2. Run info-center logbuffer

   The device is enabled to output information to the log buffer.

   By default, the device is enabled to output logs to the log buffer.

3. Run info-center logbuffer channel { channel-number | channel-name }

   The channel used by the device to output logs to the log buffer is specified.

   By default, the device uses channel 4 to output logs to the log buffer.

4. Run info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } ^*

   A rule for outputting logs to a channel is set.

   By default, channel 4 is enabled to output logs and the lowest log severity is warning.

5. (Optional) Run info-center logbuffer size logbuffer-size

   The maximum number of logs in the log buffer is set.

   By default, a log buffer can store a maximum of 512 logs.