Configuring the Device to Output Traps to the Trap Buffer

Procedure

1. Run system-view

   The system view is displayed.

2. Run info-center trapbuffer

   The device is enabled to output traps to the trap buffer.

   By default, the device is enabled to output traps to the trap buffer.

3. Run info-center trapbuffer channel { channel-number | channel-name }

   The channel used by the device to output traps to the trap buffer is specified.

   By default, the device uses channel 3 to output traps to the trap buffer.

4. Run info-center source { module-name | default } channel { channel-number | channel-name } trap { state { off | on } | level severity } ^*

   A rule for outputting traps to a channel is set.

   By default, channel 3 is enabled to output traps and the lowest severity is debugging.

5. (Optional) Run info-center trapbuffer size trapbuffer-size

   The maximum number of traps in the trap buffer is set.

   By default, the trap buffer can store a maximum of 256 traps.