Configuring the Device to Output Traps to a Terminal

Procedure

1. Run system-view

   The system view is displayed.

2. Run info-center monitor channel { channel-number | channel-name }

   A channel through which traps are output to a user terminal is specified.

   By default, the device uses channel 1 to output traps to a user terminal.

3. Run info-center source { module-name | default } channel { channel-number | channel-name } trap { state { off | on } | level severity } ^*

   A rule for outputting traps to a channel is set.

   By default, channel 1 is enabled to output traps and the lowest severity is debugging.

4. Run quit

   Return to the user view.

5. Run terminal monitor

   Display of logs, traps, and debugging message output is enabled on the user terminal.

   By default, console display is enabled and terminal display is disabled.

6. Run terminal trapping

   Traps display is enabled on the user terminal.

   By default, trap display is enabled on the user terminal.