Configuring the Device to Output Debugging Messages to the Terminal

Context

After debugging messages are output to a user terminal, you can view debugging messages on the user terminal (host from which you log in to the device through STelnet) to monitor device running.

Procedure

Run system-view
The system view is displayed.
Run info-center monitor channel { channel-number | channel-name }
A channel used by the device to output debugging messages to a user terminal is specified.

By default, the device uses channel 1 to output debugging messages to a user terminal.
Run info-center source { module-name | default } channel { channel-number | channel-name } debug { state { off | on } | level severity } ^*
A rule for outputting debugging messages to a channel is set.

By default, channel 1 is enabled to output debugging messages and the lowest severity is debugging.
Run quit
Return to the user view.
Run terminal monitor
Display of logs, traps, and debugging message output is enabled on the user terminal.

By default, console display is enabled and terminal display is disabled.
Run terminal debugging
Debugging message display is enabled on the user terminal.

By default, debugging message display is disabled on the user terminal.