Monitoring the IP Performance Running Status

In routine maintenance, you can run the following commands in any view to check the running status of IP performance.

Run the display icmp statistics command to check ICMP traffic statistics.
Run the display ip interface [ interface-type interface-number ] or display ip interface brief [ interface-type [ interface-number ] | slot slot-id [ card card-number ] ] command to check interface-related IP information.
Run the display ip socket [ monitor ] [ task-id task-id socket-id socket-id | socket-type socket-type ] command to check information about the created IPv4 sockets.
Run the display ip socket register-port command to check non-well-known port numbers that have been assigned to services.
Run the display ip statistics command to check IP traffic statistics.
Run the display load-balance mode [ packet | flow | slot slot-number ] command to check the load balancing mode on a switch.
Run the display network status { all | tcp | udp | port port-number } command to check the network status.
Run the display rawip statistics command to check RawIP traffic statistics.
Run the display tcp status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ip-address ] [ local-port local-port-number ] [ remote-ip ip-address ] [ remote-port remote-port-number ] ] command to check TCP connection status.
Run the display tcp statistics command to check TCP traffic statistics.
Run the display udp statistics command to check UDP traffic statistics.