<
Home
Monitoring IPv6 Running Status
Context
You can run the following commands in any view to check IPv6 running status.
Procedure
Run the
display ipv6 interface
[
interface-type interface-number
|
brief
] command to check IPv6 information about a specified interface.
Run the
display ipv6 statistics
command to check IPv6 traffic statistics.
Run the
display icmpv6 statistics
command to check ICMPv6 traffic statistics.
Run the
display tcp ipv6 status
command to check the TCP6 connection status.
Run the
display tcp ipv6 statistics
command to check TCP6 traffic statistics.
Run the
display udp ipv6 statistics
command to check UDP6 statistics.
Run the
display ipv6 neighbors
[
ipv6-address
| [
vid
vid
]
interface-type interface-number
|
vpn-instance
vpn-instance-name
] command to check neighbor entries.
Run the
display ipv6 socket
[
socktype
socket-type
|
task-id
task-id
socket-id
socket-id
] command to check information about a specified socket.
Run the
display ipv6 pathmtu
[
vpn-instance
vpn-instance-name
]
{
ipv6-address
|
all
|
dynamic
|
static
} command to check PMTU entries.
Run the
display default-parameter tcp6
command to check the default values of all configurable parameters on the TCP6 module.
Run the
display ipv6 attack-source overlapping-fragment
command to check source information about overlapping fragment attacks.
Run the
display rawip ipv6 statistics
command to check Raw IPv6 packet statistics.
Run the
display tcp ipv6 authentication-statistics
command to check authentication statistics of a specified TCP6 connection.