Configuring MP-IBGP Between PEs and ASBRs in the Same AS

Procedure

1. Run system-view

   The system view is displayed.

2. Run bgp { as-number-plain | as-number-dot }

   The BGP view is displayed.

3. Run peer ipv4-address as-number as-number

   The peer ASBR is specified as the IBGP peer.

4. Run peer ipv4-address connect-interface loopback interface-number

   The address of the loopback interface is specified as the source address of the BGP session.

5. Run ipv6-family vpnv6

   The BGP IPv6 VPN address family view is displayed.

6. Run peer ipv4-address enable

   The exchange of VPN-IPv6 routes with the peer PE or the ASBR is enabled.