Configuring All Client PEs to Establish IBGP Connections with the RR

You can configure a PE to establish an MP-IBGP peer relationship with an RR. In this manner, the RR reflects VPNv6 routes for the PE.

Perform the following steps on all Client PEs.

Run system-view
The system view is displayed.
Run bgp { as-number-plain | as-number-dot }
The BGP view is displayed.
Run peer ipv4-address as-number as-number
The RR is specified as the BGP peer.
Run peer ipv4-address connect-interface interface-type interface-number
The interface is specified as an interface to establish the TCP connection.
Run ipv6-family vpnv6
The BGP VPNv6 address family view is displayed.
Run peer ipv4-address enable
The capability of exchanging IPv6 VPN routes between the Client PE and the RR is enabled.