LDP Session Is Down

Procedure

1. Check whether the interface where the LDP session is established is shut down.

   Run the display this command in the interface view. If the following information is displayed:

   shutdown

   The interface is shut down.

   If the interface is shut down, run the undo shutdown command to start the interface.

2. Check whether the MPLS-related configurations are deleted.

   Run the display current-configuration command in any view to check whether MPLS-related configurations exist.

   • If the output does not include the following information:

     mpls
     

     The MPLS configuration is deleted.
   • If the output does not include the following information:

     mpls ldp
     

     The MPLS LDP configuration is deleted.
   • If the output does not include the following information:

     mpls ldp remote-peer
     

     The remote LDP session is deleted.

   If MPLS-related configurations are deleted, run the corresponding commands to restore the configurations.