Context
In general, VPN traffic is forwarded through an LSP tunnel
but not an MPLS TE tunnel. To import VPN traffic to the MPLS TE tunnel,
you need to configure a tunnel policy.
Procedure
You can configure either of the
following types of tunnel policies according to service requirements:
- Tunnel type prioritizing policy: Such a policy specifies the sequence
in which different types of tunnels are selected by the VPN. For example,
you can specify the VPN to select the TE tunnel first.
- Tunnel binding policy: This policy binds a TE tunnel to a specified
VPN by binding a specified destination address to the TE tunnel to
provide QoS guarantee.
For detailed instructions, see Configuring and Applying a Tunnel Policy in "BGP/MPLS IP
VPN Configuration" in the S2720, S5700, and S6700 V200R019C10 Configuration Guide - VPN.