Verifying the Configuration of Adjusting the Path of a CR-LSP

Procedure

• Run the display mpls te tunnel verbose command to check information about the MPLS TE tunnel.
• Run the display mpls te srlg { srlg-number | all } command to check the SRLG configuration and interfaces in the SRLG.
• Run the display mpls te link-administration srlg-information [ interface interface-type interface-number ] command to check the SRLG that interfaces belong to.
• Run the display mpls te tunnel c-hop [ tunnel-name ] [ lsp-id ingress-lsr-id session-id lsp-id ] command to check path computation results of tunnels.
• Run the display default-parameter mpls te cspf command to check default CSPF settings.