Verifying the Manual TE FRR Configuration

The configurations of manual TE FRR are complete.

Run the display mpls lsp lsp-id ingress-lsr-id session-id lsp-id [ verbose ] command to check information about a specified primary tunnel.
Run the display mpls lsp attribute bypass-inuse { inuse | not-exists | exists-not-used } command to check information about the attribute of a specified bypass LSP.
Run the display mpls lsp attribute bypass-tunnel tunnel-name command to check information about the attribute of a bypass tunnel.
Run the display mpls te tunnel-interface [ tunnel interface-number | auto-bypass-tunnel [ tunnel-name ] ] command to check detailed information about the tunnel interface of a specified primary or bypass tunnel.
Run the display mpls te tunnel path [ [ [ tunnel-name ] tunnel-name ] [ lsp-id ingress-lsr-id session-id lsp-id ] | fast-reroute { local-protection-available | local-protection-inuse } | lsr-role { ingress | transit | egress } ] command to check information about paths of a specified primary or bypass tunnel.
Run the display mpls rsvp-te statistics fast-reroute command to check TE FRR statistics.
Run the display mpls stale-interface [ interface-index ] [ verbose ] command to check the information about MPLS interfaces in the Stale state.