Verifying the RPF Check Policy Configuration

Context

After changing the reverse path forwarding (RPF) check policy, check the multicast static routing table, multicast routing table, and RPF routing table to verify that the multicast network can operate normally.

Procedure

Run the display multicast routing-table [ vpn-instance vpn-instance-name ] static [ config ] [ source-address { mask | mask-length } ] command to check the multicast static routing table.
Run either of the following commands to check the multicast routing table:
- display multicast [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none } ] ^* [ outgoing-interface-number [ number ] ]
Run the display multicast [ vpn-instance vpn-instance-name | all-instance ] rpf-info source-address [ group-address ] [ rpt | spt ] command to check the RPF route to a specified multicast source.