< Home

Verifying the Configuration of Parameters for Controlling the MFIB

Context

After configuring the parameters for controlling the IPv6 MFIB, check the IPv6 MFIB to verify that the multicast network is operating properly.

Procedure

  • Run the display multicast ipv6 forwarding-table [ ipv6-source-address [ ipv6-source-mask-length ] | ipv6-group-address [ ipv6-group-mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { { exclude | include | match } { interface-type interface-number | register | none } } | { statistics | verbose } ] * command to check the IPv6 MFIB.
Parent Topic: Configuring the Parameters for Controlling the IPv6 Multicast Forwarding Table
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic