Verifying the 802.1X Authentication Configuration

You can run the commands to check the configured parameters after completing the 802.1X authentication configuration.

Run the display dot1x [ statistics ] [ interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10> ] command to check the 802.1X authentication configuration.
Run the display mac-address authen [ interface-type interface-number | vlan vlan-id ] ^* [ verbose ] command to check the current authen MAC address entries in the system.
Run the display user-group [ group-name ] command to check the user group configuration.
Run the display access-user command to check information about online NAC users.
Run the display aaa statistics access-type-authenreq command to verify the number of authentication requests.
Run the display port connection-type access all command to check all current downlink interfaces on the device.
Run the display dot1x quiet-user { all | mac-address mac-address } command to check information about 802.1X authentication users who are quieted.
Run the display access-user dot1x-identity statistics command to display statistics about Identity packets for 802.1X authentication on a switch.