Default Settings for NAC

Table 1 describes the default settings for 802.1X authentication.

**Table 1** Default settings for 802.1X authentication
Parameter	Default Setting
802.1X authentication	Disabled
Interface authorization status	Auto
Access control mode on the interface	MAC address-based
User authentication mode	CHAP authentication

Table 2 describes the default settings for MAC address authentication.

**Table 2** Default settings for MAC address authentication
Parameter	Default Setting
MAC address authentication	Disabled
User name format	User names and passwords in MAC address authentication are MAC addresses without hyphens (-).
User authentication domain	Default

Table 3 describes the default settings for Portal authentication.

**Table 3** Default settings for Portal authentication
Parameter	Default Setting
Portal authentication	Disabled
Portal protocol versions supported by the device	v2, v1
Number of the destination port that the device uses to send packets to the Portal server	50100
Number of the port that the device uses to listen to Portal protocol packets	2000
Source subnet for Portal authentication	0.0.0.0/0
Portal authentication mode of the built-in Portal server	CHAP mode
Offline detection period	300 seconds

Parent Topic: NAC Configuration (Common Mode)

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic Next topic >