Verifying the NAC Extended Functions Configuration
Context
After configuring extended functions, run the following
commands to check the configuration.
Procedure
Run the display access-context
profile [ nameprofile-name ] command to check the configuration of the
user context profile.
Run the display access-author
policy [ namepolicy-name ] command to check the configuration of the
authorization policy for user authentication events.
Run the display device-profile { all | profile-nameprofile-name } command to check the configuration
of the terminal type identification profile. (This
command is supported by S5730-HI, S5731-H, S5731S-H, S6730-H, S6730S-H, S5732-H, S6720-HI, and S5720-HI.)
Run the display static-user [ domain-namedomain-name | interfaceinterface-type interface-number | ip-addressstart-ip-address [ end-ip-address ] | vpn-instancevpn-instance-name ] * [ detail ] command
to check information about static users.
Run the display portal quiet-user { all | user-ipip-address | server-ipip-address } command to check information about Portal authentication
users who are quieted.
Run the display mac-authen
quiet-user { all | mac-addressmac-address } command to check information about MAC address authentication
users who are quieted.
Run the display dot1x quiet-user { all | mac-addressmac-address } command to check information
about 802.1X authentication users who are quieted.
Run the display access-user dot1x-identity statistics command to display statistics about Identity packets for 802.1X authentication on a switch.