(Optional) Configuring the Device to Send EAP Packets with a Code Number to 802.1X Users
Context
When a non-Huawei device used as the RADIUS server sends RADIUS packets with attribute 61, EAP packet code number 0xa (hexadecimal notation, 10 in decimal notation), and data type being 0x19 (hexadecimal notation, 25 in decimal notation) to the device, run the dot1x eap-notify-packet command on the device so that the device can send EAP packets with code number 0xa and data type 0x19 to users. If the dot1x eap-notify-packet command is not executed, the device does not process EAP packets of this type and users may be disconnected.
Perform this configuration if the device connects to an H3C iMC RADIUS server. For other precautions about interoperability between the device and H3C iMC RADIUS server, see What Should I Be Aware of When Connecting the Device to an H3C iMC RADIUS Server?.
Procedure
- Run system-view
The system view is displayed.
- Run dot1x eap-notify-packet eap-code code-number data-type type-number
The device is configured to send EAP packets with a code number to 802.1X users.
By default, the device does not send EAP packets with a code number to 802.1X users.
If an H3C iMC functions as the RADIUS server, run the dot1x eap-notify-packet eap-code 10 data-type 25 command on the device.