Configuring the Bandwidth Share Mode

Context

On a home network, all family members go online using the same account. To improve service experience of family members, you can configure the bandwidth share mode so that all members can share the bandwidth.

The bandwidth share mode is supported by the S5730-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, and S5720-HI.

Procedure

Run system-view
The system view is displayed.
(Optional) Enter a domain view.
1. Run aaa
  The AAA view is displayed.
2. Run domain domain-name
  A domain is displayed.
Run band-width share-mode
The bandwidth share mode is enabled.

By default, the bandwidth share mode is disabled.
- If this command is run in the system view, it takes effect for all new online users who connected to the device. If this command is run in the AAA domain view, it takes effect only for new online users in the domain.
- If the local or remote RADIUS server does not assign CAR settings to the users who will go online and the online users, the share mode is invalid to the users.
- If the bandwidth share mode is enabled and different users use the same account for authentication, the users going online with no CAR settings assigned will not be affected when CAR settings are assigned to the users who go online later.