Setting the User Queue Scheduling Mode of Single-User Mode

Context

When HQoS is used to implement fine-granularity scheduling for authenticated users, the same user queue is used for scheduling traffic of users who use the same account for login by default. To implement fine-granularity scheduling for each user, set the user queue scheduling mode to single-user mode.

Procedure

Run system-view
The system view is displayed.
(Optional) Enter the AAA domain view.
1. Run aaa
  The AAA view is displayed.
2. Run domaindomain-name
  The domain view is displayed.
Run user-queue single-user-mode
The user queue scheduling mode is set to single-user mode.

By default, user queue scheduling uses the user sharing mode.
- This command is not supported for wireless users.
- If you run this command in the system view, the configuration takes effect for all new users who go online on this device. If you run this command in an AAA domain, the configuration takes effect only for the new users in the AAA domain.
- When HQoS-based authorization is configured for wireless users, only the single-user mode is supported for user queue scheduling.
Only the S5720-HI supports this command.