< Home

Configuring NetStream Original Flow Statistics Exporting

Context

Original flow statistics can be exported only after you have specified the source IP address, destination IP address and destination UDP port number for the exported packets.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ipv6 netstream export source ip-address command to configure the source address of the exported packets carrying IPv6 flow statistics.
  3. Run the ipv6 netstream export host ip-address port-number [ vpn-instance vpn-instance-name ] command to configure the destination NSC for exporting packets carrying IPv6 original flow statistics.

    You can configure two destination IP addresses to implement NSC backup. To configure a third destination IP address, run the undo ipv6 netstream export host command to delete an existing one first; otherwise, the system displays a message indicating that the maximum number of IP addresses is exceeded and the configuration fails.

Parent Topic: Configuring Exporting of IPv6 Original Flow Statistics
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >