Configuring Versions for Exported Packets

Procedure

1. Run the system-view command to enter the system view.
2. Run the ip netstream aggregation { as | as-tos | destination-prefix | destination-prefix-tos | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos } command to enter the NetStream aggregation view.
3. Run the export version version command to set the version of the exported packets.

   By default, the version of the exported packets carrying IPv4 aggregation flow statistics is V8.

   

   After a NetStream server with V9 configured restarts, you can run the refresh netstream template command in the user view to enable the device to resend NetStream export template.

4. (Optional) Run the template timeout-rate timeout-interval command to configure the interval at which the switch sends the NetStream export template to the NetStream server when IPv4 aggregation flow statistics is exported in NetStream V9.

   By default, the switch sends the NetStream export template to the NetStream server at the interval of 30 minutes.