< Home

(Optional) Stopping an NQA Test Instance

Context

A running NQA test instance can stop in the following modes:
  • The test stops automatically after all test packets are sent.
  • Stop the NQA test instance at a specified time.
  • Stop the NQA test instance after a delay.
Stop a running NQA test instance using either of the following commands:
  • Run the undo start command to stop the running NQA test instance.
  • Run the stop command to stop the running NQA test instance.

Procedure

  • Run the undo start command.
    1. Run system-view

      The system view is displayed.

    2. Run nqa test-instance admin-name test-name

      The NQA view is displayed.

    3. Run undo start

      The running NQA test instance is stopped.

  • Run the stop command.
    1. Run system-view

      The system view is displayed.

    2. Run nqa test-instance admin-name test-name

      The NQA view is displayed.

    3. Run stop

      The running NQA test instance is stopped.

Parent Topic: Scheduling an NQA Test Instance
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >