Configuring the Client Clock

Procedure

1. Run system-view

   The system view is displayed.

2. Run ntp-service { max-sys-poll max-sys-poll-value | spike-offset spike-offset-value | sync-interval interval } ^*

   The following are configured:

   • The maximum polling interval. The default interval is 2¹⁷s.
   • The timestamp difference between packets sent by the clock server and received by the client. The default difference is 128 ms.
   • The interval at which synchronization of the client clock occurs. The default interval is 600 seconds.
   

   Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support max-sys-poll max-sys-poll-value and spike-offset spike-offset-value parameters.

3. Run ntp-service max-distance max-distance-value

   The maximum NTP synchronization distance is configured.

   By default, The maximum NTP synchronization distance is 1 second.