Prerequisites
The configurations for OSPF attributes on the NBMA network and P2MP network are complete.
Procedure
- Run either of the following commands to check LSDB information:
-
display ospf [ process-id ] lsdb [ brief ]
-
display ospf [ process-id ] lsdb [ { router | network | summary | asbr | ase | nssa | opaque-link | opaque-area | opaque-as } [ link-state-id ] ] [ originate-router [ advertising-router-id ] | self-originate ] [ age { min-value min-age-value | max-value max-age-value } * ]
- Run the display ospf [ process-id ] peer [ [ interface-type interface-number ] neighbor-id | brief | last-nbr-down ] command to view OSPF neighbor information.
- Run the display ospf [ process-id ] nexthop command to check OSPF next hop information.
- Run either of the following commands to check OSPF routing table information:
-
display ospf [ process-id ] routing [ ip-address [ mask | mask-length ] ] [ interface interface-type interface-number ] [ nexthop nexthop-address ]
-
display ospf [ process-id ] routing router-id [ router-id ]
- Run the display ospf [ process-id ] interface [ all | interface-type interface-number ] [ verbose ] command to check OSPF interface information.