Prerequisites
Configuring basic OSPFv3 functions is complete.
Procedure
- Run the display ospfv3 [ process-id ] command to check the summary information about the OSPFv3 process.
- Run the display ospfv3 [ process-id ] interface [ area area-id ] [ interface-type interface-number ] command to check the OSPFv3 interface information.
- Run the following commands to check OSPFv3 LSDB information:
-
display ospfv3 [ process-id ] lsdb [ area area-id ] [ originate-router advertising-router-id | self-originate ] [ { router | network | inter-router [ asbr-router asbr-router-id ] | { inter-prefix | nssa } [ ipv6-address prefix-length ] | link | intra-prefix | grace } [ link-state-id ] ]
-
display ospfv3 [ process-id ] lsdb [ originate-router advertising-router-id | self-originate ] external [ ipv6-address prefix-length ] [ link-state-id ]
- Run the display ospfv3 [ process-id ] [ area area-id ] peer [ interface-type interface-number ] [ verbose ] command or display ospfv3 [ process-id ] [ area area-id ] peer neighbor-id [ verbose ] command to check the information about the OSPFv3 neighbor.
- Run the display ospfv3 [ process-id ] routing [ abr-routes | asbr-routes | statistics | ipv6-address prefix-length | intra-routes | inter-routes | ase-routes | nssa-routes ] command to check the OSPFv3 routing table:
- Run the display ospfv3 [ process-id ] path command to check the paths to a destination address.
- Run the display default-parameter ospfv3 command to check the default OSPFv3 configuration.